Automatic Gantry Machining Center

High Precision Linear Guide Rail: Ensures smooth and accurate motion for precise machining operations.

Heavy-Duty Construction: Built to withstand heavy loads and deliver consistent performance.

BT50 Taper Spindle: Provides superior rigidity and durability for robust machining tasks.

Three-Axis Servo Feed: Ensures smooth and controlled movements for optimal precision.

Export Wooden Case Packaging: Secure and durable packaging for safe transportation.

Gantry Type Milling Machine Machining Center Installation conditions:

1. Temperature In order to keep the machine tool processing accuracy within the standard value range, it is necessary to ensure that the working environment temperature is 17°C ~ 25°C, and the temperature change for 24 hours a day should be kept within ±2°C. If the accuracy of the parts being processed is lower than the factory accuracy of the machine tool, the ambient temperature range can be relaxed to 10°C~38°C.

2. Humidity Continuous: Below 75% (no condensation) Short time: 95% or less (no condensation)

3. Altitude Below 1000m

4. Installation site conditions The equipment installation site should be away from direct sunlight, vibration sources and heat sources, as well as high-frequency generators, welding machines, etc., to avoid machine tool production failures or loss of machine tool accuracy.

5. Air source requirements Air source pressure ≥0.6Mpa, filtration accuracy 100μm. In order to ensure the normal working performance of the equipment, if the compressed air source cannot meet the air source requirements, an air source purification device (dehumidification, oil removal, filtration) should be added before the machine tool air intake.

6. Power supply 3-phase 380V±10%; 50H Z If the voltage in the area where it is used is unstable, the machine tool should be equipped with a regulated power supply to ensure the normal operation of the machine tool. Regular work

7. Power source capacity 55KVA

8. Grounding Good grounding is required. It is recommended that each machine tool be grounded separately. The grounding wire should be a copper wire. The wire diameter should not be less than 10mm2 and the grounding resistance should be less than 4 ohms.

1.How to send my enquiry?
You can contact us by email, phone call, Instant Messenger (WhatsApp, WeChat, Skype).
2 . How can I choose the most suitable machines?
Please tell us your requirement of the machine, or you can also send us the products drawing, our engineer can help to choose the best model for you.
3: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
4: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ; Irrevocable LC at sight .
5.Check the acceptance
When receiving the goods, please check product carefully: Whether there is packing damage, leakage and whether the goods are damaged; Whether product quantity and accessories are same as required; Whether all machine details are fine If there is any problem about machine, please take pictures and contact us immediately.
6.OEM Service
We accept purchase orders with customers' brand or trade mark.