Industrial Surface Grinder

Details

Industrial Surface Grinder
Table（Permanent magnet chuck）size：500*250mm
Vertical movement：Manual / Rapid movement+manual / AC servo motor
Cross movement：Auto intermittent / Motor / AC servo motor
Longitudinal movement：Hydraulic
Controller（options）：PLC system / CNC system

Features

1：Guide way is coated with Turcite and precision hand scraped,move smoothly and keep the accuracy long life.

2：Well-designed control panel with two-way rotate structure,make the operator getting suitable operating position very easy,improve work efficiency.

3：The industrial surface grinder is standard equipped with auto down feed AC servo motor,and controlled by PLC and HMI,to realize auto grinding,then to realize auto grinding.

4：For the control panel is equipped with HMI,by which the operator can easy operating on the machine to realize auto working

5：The industrial surface grinder adopt the V-type guide, bring transmission by synchronous belt.

6：Meanwhile, the machine adopt the exceeding precise P4 level ball bearing for spindle, having complete attachment with electromagnetic chuck or the dense chuck of permanent magnetism.

7：The small industrial surface grinder have the simple and convenient operation, low noise, high precision for processing, steady mechanical performance, reliable hydraulic system of table longitudinal movement.

Technical Parameters

Model				MY250
Bench	Max table surfacing size (L×W×H)		mm	500×250
	Max stroke (L × W)		mm	540×260
	Table maximum cutting area (L × W)		mm	500×250
	Number of T -Slot		mm	1×14
The grinding head	Distance From Table Surface To Spindle Center		mm	490
	Wheel Size(dia×width×bore)		mm	ø200×18×ø31.75
	Spindle speeds		r/min	2850
The amount of feed	Table longitudinal running speed (stepless)		m/min	3--20
	Table horizontal (front and back) the amount of feed	Continuous (variable speed)	mm/min	150
		Intermittent (stepless)	mm/time	0-5
		The handwheel rotates	mm	5
		Hand wheel each grid	mm	0.02
	Vertical (up and down) wheel feed	The handwheel rotates	mm	2
		Hand wheel each grid	mm	0.01
Motor power	Spindle motor		kw	1.5
	Cooling motor		w	40
Hydraulic system	Hydraulic motor		kw	1.5
	Working Pressure		Mpa	2.5
	Oil tark capacity		L	60
	Max. Capacity		L/min	18
Working precision	The machined surface of the base of parallelism		mm	300/0.005
	Surface Roughness		μm	Ra0.32
Weight of machine	Net		T	1.05
	Cross		T	1.15
Machine Size (L×W×H)			mm	1750×1350×1960